Autor: Bruno Betti
Lancia presented 4×4 prototype at the 1982 Turin Motor Show. The prototype kept the original model's basic mechanicals, but it had a 1600 cc engine supercharged by turbocompressor, delivering an output of 130 HP. Permanent transmission to all four wheels was obtained by adding a torque-splitter with longitudinal drive for rear-wheel transmission to the original gearbox-differential unit. A two-section shaft transmits drive to the self-locking rear differential. The most important novelty from the Lancia Experimental Workshop was this torque-splitter differential which was inserted into the engine/transverse gearbox unit and the crown wheel and pinion for transmission to the rear wheels.
Datos de la imagen:
Todas las imágenes tienen sus propietarios.
Si cree que los usuarios del sitio cometieron un error al publicar esta imagen en esta sección, estaría bien que lo indicara en los comentarios y señalara el error.
Puede hablar de lo que quiera, y no solo de coches, en el foro.
WheelsAge.org '2005–actual
Comentarios
Para poder publicar un comentario, debe crear una cuenta o iniciar sesión con una cuenta de redes sociales